01Attic Mold
Often driven by roof leaks or poor ventilation.
Call 775-322-4266
Inspection, containment, and clearance testing
Mold Remediation in Sparks, NV — A Certified Inspection and a Clear Plan to Remove It Safely
IICRC-certified technicians inspect, contain, remove, and then verify the work with post-remediation testing. You get documentation at every step — not a guess and a spray bottle.
- 20+ Years in Reno/Sparks
- IICRC-Certified Technicians
- 18 Local Specialists
- Works With All Insurance
Why Mold Needs a Professional
EPA guidance recommends professional remediation for larger or recurring growth, and for anything tied to contaminated water or HVAC systems. The reason is process — containment, controlled removal, and verification.
1
Spores travel
Containment matters
Disturbing growth without containment can move spores into clean rooms and HVAC returns.
2
Hidden growth
Most of it isn't visible
What shows on drywall is often a fraction of what sits behind it or under flooring.
3
The source
Moisture must be corrected
Cleaning the surface without correcting the water source means it returns in weeks.
Air quality note: indoor mold growth can affect air quality, and sensitivity varies by person. We handle the property side; health questions belong with your physician.
Our Remediation Process
A documented, four-step protocol modeled on IICRC S520 standards.
- 1
Inspection & Testing
Moisture mapping, visual inspection, and sampling where appropriate — so the scope is based on findings, not assumptions.
- 2
Containment
Sealed barriers and negative air pressure with HEPA filtration keep spores out of unaffected areas.
- 3
Removal & Treatment
Affected materials are removed and disposed of properly, surfaces are HEPA-vacuumed and treated, and the moisture source is addressed.
- 4
Verification & Clearance
Post-remediation verification — including third-party clearance testing on request — confirms the area meets clearance before we close out.
Step four is the one most companies skip. We document it in writing.
Schedule Free InspectionMold Situations We Handle
From a single bathroom wall to a whole-property assessment.
01
02Basement & Crawlspace
Humidity, seepage, and standing water.
Call 775-322-4266
03Bathroom & Shower
Grout, subfloor and wall cavity growth.
Call 775-322-4266
04HVAC Contamination
Ducts and coils inspected and cleaned.
Call 775-322-4266
05Post-Water-Damage Mold
Growth that followed an earlier leak or flood.
Call 775-322-4266
06Hidden Wall & Ceiling Mold
Located with moisture meters and thermal imaging.
Call 775-322-426607Containment & Removal
Sealed work areas with HEPA-filtered negative air.
Call 775-322-4266
08Whole-Home Assessments
Full-property evaluations for buyers and owners.
Call 775-322-4266Why Choose Coit
Certified process, in-house crews, and verification you can hand to anyone.
20+
Years local
18
Specialists
S520
IICRC protocol
20+ Years Serving Sparks & Reno
Locally operating since 2005.
IICRC-Certified Remediation Technicians
Trained to industry S520 protocols.
18-Person In-House Team
Our own technicians — never subcontracted crews.
Third-Party Clearance Testing
Independent verification available on completion.
Insurance Billing Assistance
Documentation and direct billing where coverage applies.
Locally Owned & Trusted
Two decades of Northern Nevada homes and properties.
Peace of Mind Through Proper Process
Two things usually sit behind a mold call: the people living in the home, and the value of the home itself. A documented remediation protects both.
For your household
Containment and HEPA filtration keep the work area isolated, so the rest of the home stays clean while we work.
For your property
Written scope, photos, and clearance results give you paperwork that holds up with buyers, appraisers, lenders, and insurers.
Not sure it’s mold?
That’s exactly what the free inspection is for. A certified technician looks, measures moisture, and tells you plainly whether remediation is warranted — with no obligation.
Request Free Inspection775-322-4266
A Controlled Process, Not Guesswork
Negative-air containment, HEPA air scrubbers, full personal protective equipment, and moisture instrumentation — the setup that separates true remediation from surface cleaning.
- HEPA air scrubbers
- Sealed containment barriers
- Negative air pressure
- Thermal & moisture mapping
- Full PPE protocols
- Photo documentation
What Clients Say
Rated on Google“They inspected first and told me the spot in my bathroom was small enough to handle simply. Honest before they were paid a dime.”
“Containment went up before anything was touched. Clearance testing came back clean and I have the report on file.”
“Attic mold from an old roof leak. Explained the process, the cause, and the fix without any pressure.”
“Documentation is thorough enough to hand straight to ownership and insurance. That is rare.”
Auto-playing
Local crews, local dispatch
Proudly Serving Sparks, Reno & Surrounding Communities
Inspections are scheduled out of our Sparks facility on Deming Way, usually within a day or two across the Reno metro.
- Sparks
- Reno
- Spanish Springs
- Sun Valley
- Verdi
- Cold Springs
- Lemmon Valley
- Washoe Valley
- Carson City
- Incline Village
- Fernley
- Dayton
Not sure if you’re in our area? Call and we’ll tell you in seconds.
Call 775-322-4266Common Questions
Straight answers before you call — no sales script.
Discoloration and a persistent musty odor are common signs, but only inspection confirms it. A certified technician checks moisture levels, looks at the surrounding building materials, and samples where appropriate before recommending any work.
Schedule Your Free, No-Obligation Mold Inspection
Prefer to talk it through first? Call 775-322-4266.